Laminar Flow Box, cleanroom cell and CleanBoy

CleanBoy Maxi – Standversion / CleanBoy Maxi - Standalone version

Laminar Flow Box FBS wahlweise mit Untergestell und Schrank / Laminar Flow Box FBS with base frame on casters and laboratory cabinet

Reinraumzelle mit festen Wänden aus Aludibond oder Acrylglas / cleanroom cell with dibond panels or acrylic glass

In industrial manufacturing as well as in science and research the need for a particle-clean and germ-free environment plays an ever important role.

For this purpose elaborated clean room facilities are being designed at great expense not only upon purchase but also for their keep-up. In many instances it is absolutely excessive to install oversized, technically complex, and expensive clean room facilities. Often the economy of an exclusive clean room does not justify for it. In many instances it is quite sufficient to create a localized clean room environment.

The Spetec Flow Box FBS or “CleanBoy” has been developed exactly for this purpose.

The use of a Laminar Flow Box or a “CleanBoy” establishes clean room conditions at the location were they are needed.

For the manufacturing of the Flow Box FBS only high quality materials such as acrylic glass and stainless steel are being applied. For installation in an acidic atmosphere a special protective coating will be offered as an option. The effective clean room space of the FBS covers a size between 2,5 square feet and 12,9 square feet.

The Flow Box is equipped with a filter of the type H 14.This filter is capable of removing 99,995 % of all particles having a size larger than 0,5 um (EU 14).
Even for particles larger than 0,21 um the degree of filtering is still 99,95 % . In this case the retention factor is 10³ which means that the air quality in the Flow Box versus the outside air will improve by a factor of 1.000. For particles larger than 0,5 um an improvement by a factor of 90.000 will be obtained .
At an air flow velocity of 0,45 m / sec. the air stream occurs laminar., which means that the air moves as a parallel stream.

The "CleanBoy", available as a standalone or tabletop device, offers a cost-effective and simple solution to the particle problem. The “CleanBoy” is simply set up and is ready to use immediately with no further installation.

The “CleanBoy” is available in the following versions:

CleanBoy Mini – Tabletop version
CleanBoy Maxi – Standalone version
CleanBoy Flexi – Flexible with regards to size, shape, and equipment

The mobile clean room cell is a further option for an economical alternative to a complete clean room. It is made from anodized or acid-resistant plastic-coated aluminium or stainless steel profiles and can be set up in any laboratory, production room/hall, or office without having to take structural measures. A complete clean room workstation can be installed in the clean room cell.

The booth itself is surrounded by a PVC strip curtain or in order to create a sealed unit. Materials like dibond panels, acrylic glass or safety glass are also possible. The profile technology allows you to customize the size and shape of the clean room booth at will up to a freely selectable size.

The effective clean room area can be varied by combining individual laminar flow modules of various sizes. Even production lines, conveyors, or packaging machines can be integrated into the clean room booth. Clean room category 100 is attained by using H14 filters. Due to the laminar air flow, there is no exchange of impure outside air underneath the flow modules.