Full Kraft ahead

Into straight times nine months the CAT Clean air Technology GmbH from Stuttgart for Danfoss silicone power in Flensburg realized a 4,000 square meter large pure area. To be developed and produced here achievement modules for the ranges� Industry, automotive and renewable energy among other things for frequency static frequency changer, current supply, hybrid vehicles, steering systems as well as for solar electricity and Windturbinen. The building modernization accompanying with the pure area makes it for Danfoss possible at the same time to lower the energy costs just like the CO2-Emissionen for the pure space enterprise over up to 24 per cent. Flensburg, work area of Danfoss silicone power at the Husumer road: From the outside nothing points to the fact that in of Danfoss in November Motorola buildings former one is 2010 bought the momentarily largest pure area for power electronics construction units in Europe. The worth millions investment had become equivalent from two reasons necessary: On the one hand, in order to fulfill the high TS-16949-Qualit�tsstandards for the production from power modules to, on the other hand, because the Danfoss premises at the location in Schleswig blew up their capacity borders due to strong growth. To the information: Danfoss silicone power belonged to the Danfoss power Electronics division with seat in Denmark, the product range covers above all frequency static frequency changers and Solar-Wechselrichter.Als supplier approximately around the clean-room technology in Flensburg also on board: the CAT Clean air Technology GmbH from Stuttgart. Of Steffen Hild 1995 created and led enterprises offers its customer acceptance tests in the pure area just like the qualification and validation of clean-spacetechnical manufacturing plants. To the service portfolio belong in addition flow visualizations, calibrations, Monitoringsysteme as well as start-up and optimizations of ventilation system-more ambitious schedule with the project of Danfoss in Flensburg took over the CAT not only the part of the qualifier, but also the role of the specialized planner for clean-room technology and those of the owner representative, who coordinated and supervised the trades involved. The entire clean-room technology inclusive medium en and - disposal with nitrogen, mitrogen-hydrogen mixture, compressed air and vacuum station as well as high-purity water plant lay in hands of Imtech Germany as implementing Firma.Die choice of Danfoss fell not coincidentally on the CAT. Already in Schleswig those had extended approximately 35 coworkers strong Stuttgart company starting from spring 2010 the existing pure space surface in only four months under current production by 600 square meters. � that was as it were the ticket for larger projects with us in the enterprise �, explains Holger Ulrich, managing director of Danfoss silicone power extremely ambitiously was thereby also the schedule for the 4,000 square meters large pure area in Flensburg: At the end of of 2010 began the CAT with the feasibility study, a little later then also with the planning work, the advertisement and Angebotsprozedere was final to at the end of of April 2011, in the middle of May started the change work, at the end of of Octobers was the pure area facility. After the qualification and power measurements of all utility systems the clean-spacetechnical decrease and delivery at the customers take place in December 2011. � pleasing is for us apart from the execution developed technically above all also the fact that the conversion without date and cost deviation went to Holger Ulrich over the stage �, stresses. Strengthens energy conservation with the realization of the pure area had a high energy efficiency highest priority. Partly could be fallen back thereby even to the existence. So for example on the existing recirculated air system, which is to high-efficient heat recovery with an annual cooling load of 301.800 KW/H by 185.000 KW/H under a new ventilation system also. � the old � recirculated air system uses more warmth due to its mode of operation, but humidification saving amounts to annual over more than one million kilogram. Under line saves Danfoss by the enterprise of the past recirculated air system energy costs at a value of about 40,000 euros per year. Recently a hybrid cooling tower was added, whereby outside temperatures up to +14 degrees Celsius can be used as only cooling source for the necessary cooling capacity. Altogether Danfoss thereby reduces the CO2-Emissionen by 560 tons per year. Beyond that one decided in Flensburg for the use of LED lights, whereby annually further 110 tons of CO2 are saved. A further technical feature is among other things a high pressure fire sprinkler, which contributes clearly fewer fire fighting waters necessarily than many comparable plants and thus also for the reduction of indirect fire damage as for example by fire fighting waters or downtimes of plants. The electrically operated pump unit and those� High pressure water nebula nozzles by the way come � from Danfoss/Semco.Autor: Matthias GaulBild: One of the new pure areas with Danfoss silicone power in Flensburg

This text was translated automatically.