New separating solution

Also in the age of Hei�kanalwerkzeugen and handling withdrawals the separating technology did not lose its meaning. Depending upon concrete setting of tasks thereby different separating resolutions or separating drums can be used. The borders of the separating ability with so far well-known devices those was appropriate for small or pointed parts to blocking bends or dead head geometry, by the separating column � wriggles through themselves � in the past primarily with parts with only small size differences. Likewise rubber-like or parts with soft surfaces prepared again and again problems, which remained hanging in the separating devices. Here MTF technology developed a completely new type of separating drum and to the patent announced, which was presented for the first time on � the K 2010 � in Duesseldorf. The new rectangle drum consists of a high-grade steel cage with four tangential arranged separating columns, which can be stopped steplessly in each case between 0mm and 58mm. The separating column consist of parallel surfaces with width of 80mm. Thus � wriggling through is effectively prevented � the dead heads. By two knurled nuts for each separating gap can be made a very accurate and fast attitude on different partial geometry. Beyond that also, larger make possible the tangential going off separating column, to separate laminar parts which did not tilt in so far well-known separating devices into the separating column. The special at the rectangle drum consists however first of all of the fact that the separating column due to a thought out mechanism within the upper range of the drum cage for each revolution once briefly open and thus effectively blocking parts or dead heads prevents. Thus also softer parts than so far can be separated from each other. The high-grade steel construction basis in connection with the separating pistons sliding onto teflon predestines this type of drum for an employment in the pure area. The drum cage is in such a way laid out the fact that it can be presented on existing MTF separating drum underframes and serves thus as addition of the product program. In order to be able to select the optimal separating technology, the most different devices are available for test purposes in the MTF technical school. During supply of sample parts appropriate attempts are accomplished and documented by video.� Picture: Combined rectangle/hole drum in special equipment to the 2-step Separation of 2K-Spritzgussteilen of the dead heads

This text was translated automatically.